Needle Plates & Feeds

This is a Brother straight stitch needle plate, suitable for the following Brother sewing machines: NV1e V7 V5 VQ2 NV5000 NV2200 NX2000 Please note, you will not be able to perform any other stitch other than straight stitch with...

This is a Brother straight stitch foot and needle plate (CAT A), suitable for the Brother category A machines/Innov-is 4000 series.

This replacement needle plate will fit both the Brother 1034D and 929D overlockers. Over time needle plate's can wear and the pins found at the back can fall off. To ensure your overlocker is performing to it's best it is advised to change your needle...

This is ideal if your feed dog is broken or worn out. This replacement feed will fit the Bernina 1004, 1005, 1006, 1008, 1010, 1011, 1015, 1020, 1030, 1031, 1090, 1120, 1130, 1230 & 1530.

Ideal if your current needle plate is looking tired or worn out. Please note this is a straight stitch only needle plate. This Bernina needle plate will fit the following Bernina sewing machines: 1000, 1001, 1004, 1005, 1006, 1008, 1010,...

Ideal if your current needle plate is looking tired or worn out. This Bernina needle plate will fit the following Bernina sewing machines: 1000, 1001, 1004, 1005, 1006, 1008, 1010, 1011, 1015, 1020, 1030, 1031, 1090, 1120, 1130, 1230 &...

Straight Seaming Needle Plate suitable for Singer 20U Industrial sewing machines.

Singer 20U Straight Stitch Seaming Needle Plate

B22 Generic needle plate line gauge metric (mm) with 2.2mm needle hole use with feed dog. This needle plate will fit 99% of Juki and Brother industrial flatbed sewing machines.

This plastic plate slides into place and covers the bobbin and stops it from jumping out. Suitable for: AE1700, AE2500, LX17, LX25, LX27NT, LX37NT, RL417, RL425, UJ417

This Bernina needle clamp screw driver is for removing/replacing needles in the clamp, this also doubles up as a bulb removing tool for the smaller style Bernina sewing machine bulbs. Part Number: 001 308 7300

This Bernina needle plate screw driver is for removing/replacing the screws in your needle plate. This screwdriver is designed for the Activa 135-145.

This needle screw is a direct replacement for your Brother 3034D overlocker. This screw is used to hold in place the needles and is to be used in conjunction with the correct sized allen key (provided with your machine). Please note the picture is for...