This foot attaches threaded pearls or beads onto the edge of fabrics. This foot can be used for a string of 3mm to 4mm pearls and beads.
Steps for use:
1. Retract the knife on your machine.
2. Set the machine to 3 thread overlock, stitch length to pearl size, stitch width to 3mm from 5mm, and adjust the tension.
3. Fold the fabric.
4. Align the edge of the fabric to the guide on the front of the foot.
5. Adjust the guide so that the needle moves down at the position of 1 to 1.5 mm from the folded edge.
6. Place the strings of pearls/beads onto the tunnel and then sew.
This foot is for use with the Brother 1034D Overlocker.
