Brother

The Brother 4234D is an exceptional overlocker and has wide array of uses. The 4234D will sew edges, collars and decorative trim for a t-shirt's, trouser's and much more. This machine has huge...

This is a reboxed machine. The Brother 4234D is an exceptional overlocker and has wide array of uses. The 4234D will sew edges, collars and decorative trim for a t-shirt's, trouser's and much more...

This foot makes embellishment edges, cuffs, collars, etc with 5 cords. This foot works with zigzag or decorative stitch mode. Stitch over all cords. Easy threading, visibility and a 7mm wide...

Replacement allen key style needle screw for Brother 500 series industrial overlocker. This needle screw will fit the followingBrother industrial overlockers: B511 B531 B551

This replacement belt guard will fit the Brother 500 series indsutrial overlock machines.

This waste chute is for use with the Brother 500 series industrial overlock machines. This lower waste chute should be used with the upper waste chute.

This waste chute is for use with the Brother 500 series industrial overlock machines. This upper waste chute should be used with the lower waste chute.

This mounting rubber is suitable for Brother 500, 600 and V series industrial overlocker's. This is a hard compound rubber for the rear right hand corner of the drip tray (this rubber takes most...

This mounting rubber is suitable for Brother 500, 600 and V series industrial overlocker's. This is a soft compound rubber for the rear left hand corner and front of the drip tray. For a...

This is a direct replacement lower knife for the Brother 500 to 600 series industrial overlocking machines. It is advised to replace both the top and bottom knife at the same time to avoid...

This is a direct replacement upper knife for the Brother 500 to 600 series industrial overlocking machines, this knife has a carbide tip. It is advised to replace both the top and bottom knife at...

Brother Metal Bobbins suitable for PQ1300/1500, PQ-1500S, PR-620, Entrepreneur® PR-650, PR655 Note: These Bobbins will need to be wound with Brother Bobbin Embroidery Thread

This is a replacement bobbin case. This bobbin case will only fit the Brother 651/652 & Singer 20U Industrial Sewing Machines

This foot makes embellishment edges, cuffs, collars, etc with 7 cords. This foot works with zigzag or decorative stitch mode. Stitch over all cords. Easy threading, visibility and a 7mm wide foot...

This attachment easily makes pleats or ruffling in light weight fabrics. Use this especially for making your home deco more gorgeous.  Compatible with Star 110 to 140E, Super Ace and Super...

This blade/knife is a direct replacement for your Brother 925D overlocker machine. This is used to trim the fabric whilst overlocking. We strongly recommend replacing both the upper and lower...

The low shank adapter is used for attaching a screw-on presser foot such as the gathering foot to a sewing machine with high shank. Compatible with Super Galaxie 2000

The low shank adapter is used for attaching a screw-on presser foot such as the gathering foot to a sewing machine with high shank. Compatible with Super Ace e, Super Galaxie 2100, 3000 and 3100

For attaching various width bias tape, ranging from 5 - 20mm wide. Clear plastic bias tape guide By adjusting this guide, you can sew various widths of bias tape, ranging from 5 - 20mm

This plastic plate slides into place and covers the bobbin and stops it from jumping out. Suitable for: AE1700, AE2500, LX17, LX25, LX27NT, LX37NT, RL417, RL425, UJ417

Make working on challenging fabrics a breeze with the Brother Airflow 3000 overlocker, Brother’s fastest, easiest, electronic air threader. Built for speed it boasts an easy-to-use air...

These guides are useful for sewing pintucks and for finishing seams by topsitiching seam allowances folded over to one side. The needle position is 2mm from the right edge. Compatible with 1500,...

These guides are useful for sewing pintucks and for finishing seams by topsitiching seam allowances folded over to one side. The needle position is 8mm from the right edge. Compatible with...

These guides are useful for sewing pintucks and for finishing seams by topsitiching seam allowances folded over to one side. The needle position is 5mm from the right edge. Compatible PQ-1500,...

With a tape guide, this makes attractive binding similar to pre-folded or unfolded bias tape. Compatible with all our home-use sewing machines.

Creates blind hems on a variety of fabrics, using the adjustable guide on this presser foot. Works well for edge stitching, attaching lace, and fabric edge joining. This is great for both...

Adjustable for creating blind hems on a variety of fabrics. This foot is also handy for sewing fabric edges with a fixed seam allowance.(Snap-on foot) Compatible with Star 10-40e,...

This foot is for trimming, finishing and hemming edges in a simple operation. A blind stitch is the stitch generally found on the bottom of trouser's where a stitch needs to be invisible on one side...

Bobbin Case for the Brother BC range The Brother BC range has a 7mm wide zig zag stitch. Fits: Innov-is 50, Innov-is 30, Innov-is 10, CS8060, CS8070, CS8080, CS8120, CS8130, CS8150, NX-200,...

Bobbin Case for the Brother BM range Fits most Brother Sewing Machines with a Top Horizontal Loading Spool that has a 5mm wide zig zag Fits: BM2100, BM2600, BM2700, BM3500, BM3600, XL2120,...

Bobbin Case for the Brother Innovis range Fits most of Brothers large sized Innovis Sewing Machines Fits: Innov-is 4000d, Innov-is 4000, Innov-is 1500d, Innov-is 1500, Innov-is QC1000, Innov-is...

This Bobbin Holder is for the Brother LX range of Sewing Machines. The Bobbin Case in your Sewing Machine can easily become damaged usually through the Needle Point catching the outer edge of the...